https://community.extremenetworks.com/t5/aerohive-migrated-content/is-there-a-way-through-the-cli-or-through-hivemanager-to/m-p/92432#M13396 <P>A reboot would also cause a background scan to happen as the AP comes up, but that would be the only way to trigger the scan manually. Typically they should be trying to do a scan every 10 minutes. You'd also want to check your Radio Profile settings to make sure background scans are allowed in typical network conditions. </P> Thu, 06 Jun 2019 22:30:59 GMT samantha_lynn 2019-06-06T22:30:59Z https://community.extremenetworks.com/t5/aerohive-migrated-content/is-there-a-way-through-the-cli-or-through-hivemanager-to/m-p/92431#M13395 <P>We have access points that are not performing background scans and due to interference we need them to be forced to scan again.</P> Thu, 06 Jun 2019 09:59:41 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/is-there-a-way-through-the-cli-or-through-hivemanager-to/m-p/92431#M13395 rodkey 2019-06-06T09:59:41Z https://community.extremenetworks.com/t5/aerohive-migrated-content/is-there-a-way-through-the-cli-or-through-hivemanager-to/m-p/92432#M13396 <P>A reboot would also cause a background scan to happen as the AP comes up, but that would be the only way to trigger the scan manually. Typically they should be trying to do a scan every 10 minutes. You'd also want to check your Radio Profile settings to make sure background scans are allowed in typical network conditions. </P> Thu, 06 Jun 2019 22:30:59 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/is-there-a-way-through-the-cli-or-through-hivemanager-to/m-p/92432#M13396 samantha_lynn 2019-06-06T22:30:59Z