AP630 firmware version 10.3 capwap disappear

ckness — Thu, 23 Feb 2023 05:49:05 GMT

AP630 firmware version 10.3 capwap disappears over and over Agin. The settings will disappear from the config within a min of adding and saving ... I have reset unit and tried to roll back firmware. Always removes capwap settings.

AH-2ab2c0#show capwap client
CAPWAP client: Enabled
CAPWAP transport mode: UDP
DISCOVERY state: Sending Discovery packets to find the CAPWAP server
CAPWAP client IP: 192.168.3.156
CAPWAP server IP: 0.0.0.0
HiveManager Primary Name:
HiveManager Backup Name:
CAPWAP Default Server Name: hive.xxx.xxx
Virtual HiveManager Name: home
Server destination Port: 12222
CAPWAP send event: Enabled
CAPWAP DTLS state: Enabled
CAPWAP DTLS negotiation: Enabled
DTLS next connect status: Enable
DTLS always accept bootstrap passphrase: Enabled
DTLS session status: Disconnect
DTLS key type: passphrase
DTLS session cut interval: 5 seconds
DTLS handshake wait interval: 60 seconds
DTLS Max retry count: 3
DTLS authorize failed: 0
DTLS reconnect count: 0
Discovery interval: 5 seconds
Heartbeat interval: 30 seconds
Max discovery interval: 10 seconds
Neighbor dead interval:105 seconds
Silent interval: 15 seconds
Wait join interval: 60 seconds
Discovery count: 2
Max discovery count: 3
Retransmit count: 0
Max retransmit count: 2
Primary server tries: 0
Backup server tries: 0
Keepalives lost/sent: 0/61
Event packet drop due to buffer shortage: 0
Event packet drop due to loss connection: 3

debug says

CAPWAP can not find the proper request 6007, Maybe HM doesn't support it.

topic AP630 firmware version 10.3 capwap disappear in Aerohive Migrated Content

AP630 firmware version 10.3 capwap disappear