topic Re: Tunnell Guest Traffic in Aerohive Migrated Content

Tunnell Guest Traffic

bobby_clowers — Thu, 05 Dec 2019 23:01:41 GMT

Are there any instruction on exactly how to tunnel traffic from one location to another.(Ex....We have an Outside/guest vlan setup at the main office. Out at other locations we can directly connect to that vlan. How can how can we setup a tunnel/vpn back to our main location for the outside traffic. We are using extremecloudiq with AP250s. Hopefully that is enough information to help get me started.

Thanks for any help.

Re: Tunnell Guest Traffic

samantha_lynn — Fri, 06 Dec 2019 20:54:24 GMT

I can walk you through the basic steps but for detailed instructions/help, you'll want to open a case with our engineers so they can walk you through the set up. Unfortunately we don't have any guides that could help with this at this time.

Re: Tunnell Guest Traffic

bobby_clowers — Fri, 06 Dec 2019 21:33:48 GMT

We can try the basic steps first and see how that goes.

Re: Tunnell Guest Traffic

samantha_lynn — Sat, 07 Dec 2019 01:14:14 GMT

I was looking around for some guides that might help and we do have the steps documented here: https://docs.aerohive.com/330000/docs/help/english/ng/Content/gui/configuration/enabling-vpn-service.htm?Highlight=VGVA

Does that look like what you need?

Re: Tunnell Guest Traffic

bobby_clowers — Sat, 07 Dec 2019 01:39:13 GMT

I don't know if that is what I need. I was thinking of like tunneling a user profile back to an AP that is at our main office for the Vlan. The only aerohive devices we have are APs, all of our switches are Cisco.