topic Re: Hive Manager - Displaying Port # of Connected switch; not MAC? in Aerohive Migrated Content

Hive Manager - Displaying Port # of Connected switch; not MAC?

scott_hewitt — Tue, 14 Jan 2020 23:56:32 GMT

In the "Hive Manager/ Devices" view I have selected:

ETH0 LLDP Port #

ETH0 LLDP Sys-ID

ETH0 LLDP Sys-Name

The ETH0 LLDP Port # shows the MAC of the port and not the actual port #. Is there a way to have it show the port number on the adjacent switch?

Re: Hive Manager - Displaying Port # of Connected switch; not MAC?

scott_hewitt — Wed, 15 Jan 2020 01:05:22 GMT

Hmmm. So to update, I have noticed that some AP's are showing the port number. But most are not. There is no difference in the switch port configuration from one to the other.

2 AP 130's connected to the same switch. One AP reports the LLDP port number, the other reports the MAC. Both AP's recently rebooted and running the same SW

Re: Hive Manager - Displaying Port # of Connected switch; not MAC?

scott_hewitt — Wed, 15 Jan 2020 01:07:28 GMT

Image attached.