topic Re: Good afternoon. Could you tell me in what way I can configure a network segment that is assigned to a specific SSID? That is, I have a segment 172.16.0.1/24 for the lan and I want the guests to deliver a 10.0.6.0/24 segment for a particular SSID in Aerohive Migrated Content

Good afternoon. Could you tell me in what way I can configure a network segment that is assigned to a specific SSID? That is, I have a segment 172.16.0.1/24 for the lan and I want the guests to deliver a 10.0.6.0/24 segment for a particular SSID

aaguirre — Sat, 23 Mar 2019 04:36:48 GMT

Good afternoon. Could you tell me in what way I can configure a network segment that is assigned to a specific SSID? That is, I have a segment 172.16.0.1/24 for the lan and I want the guests to deliver a 10.0.6.0/24 segment for a particular SSID

Re: Good afternoon. Could you tell me in what way I can configure a network segment that is assigned to a specific SSID? That is, I have a segment 172.16.0.1/24 for the lan and I want the guests to deliver a 10.0.6.0/24 segment for a particular SSID

bruce_stahlin — Sat, 23 Mar 2019 05:02:54 GMT

Are you familiar with VLANs? I recommend using a separate VLAN in conjunction with the subnet to separate the traffic. Depending on your authentication method, you could even use the same SSID, then assign the vlan based upon authentication criteria. This saves valuable airspace and reduces contention.

Re: Good afternoon. Could you tell me in what way I can configure a network segment that is assigned to a specific SSID? That is, I have a segment 172.16.0.1/24 for the lan and I want the guests to deliver a 10.0.6.0/24 segment for a particular SSID

aaguirre — Mon, 25 Mar 2019 22:18:28 GMT

Thanks BJ.

But the problem I have is that the company does not have Vlans on its switches.

Can the configuration be made with this limitation?

Re: Good afternoon. Could you tell me in what way I can configure a network segment that is assigned to a specific SSID? That is, I have a segment 172.16.0.1/24 for the lan and I want the guests to deliver a 10.0.6.0/24 segment for a particular SSID

bruce_stahlin — Mon, 25 Mar 2019 22:40:56 GMT

The only way to segment, without VLANs is to build another flat network...which is exactly what VLANs do, in a far more scalable and affordable method. Are these switches incapable of VLAN segmentation or just not configured? If you can configure these switches, I'd be happy to assist. Knowing the make/model & software version would be helpful. If these are unmanaged switches, I would certainly make the case for upgrading to ones with more capabilities. We've been using Aerohive's switches for years now.