https://community.extremenetworks.com/t5/aerohive-migrated-content/are-other-customers-having-a-high-rate-of-failure-with-the-ap550/m-p/64933#M2450 Are other customers having a high rate of failure with the AP550 access point? I deployed a bunch over winter and have had to replace 20% of them. Thu, 12 Apr 2018 04:01:31 GMT jeffrey_winckle 2018-04-12T04:01:31Z https://community.extremenetworks.com/t5/aerohive-migrated-content/are-other-customers-having-a-high-rate-of-failure-with-the-ap550/m-p/64933#M2450 Are other customers having a high rate of failure with the AP550 access point? I deployed a bunch over winter and have had to replace 20% of them. Thu, 12 Apr 2018 04:01:31 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/are-other-customers-having-a-high-rate-of-failure-with-the-ap550/m-p/64933#M2450 jeffrey_winckle 2018-04-12T04:01:31Z https://community.extremenetworks.com/t5/aerohive-migrated-content/are-other-customers-having-a-high-rate-of-failure-with-the-ap550/m-p/64934#M2451 <P>I installed 5 or 6 and had one fail, so I'm at the same percentage.</P><P>&nbsp;</P><P>During the boot process it hangs at:</P><P>&nbsp;</P><P>Creating fa bypass proc entry</P><P>cryp1: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 10.10.80.505_e5.1.2.3 (r659762)</P><P>&nbsp;</P><P>Looks like a Broadcom chip problem. Support is creating an RMA incident for me.</P><P>&nbsp;</P><P>I am also having a problem loading HiveOS 8.1r2a on the AP550, although 8.2r1a loads fine...weird.</P> Fri, 13 Apr 2018 20:46:48 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/are-other-customers-having-a-high-rate-of-failure-with-the-ap550/m-p/64934#M2451 jnesci1 2018-04-13T20:46:48Z