topic Re: Low bandwidth on mgt0 and eth0 (backhaul) interface in Aerohive Migrated Content

Low bandwidth on mgt0 and eth0 (backhaul) interface

giorgio_marzian — Fri, 08 Jun 2018 19:20:06 GMT

I'm experiencing a weird issue.

I have 11 AP connected to 1Gbps switch (same cabling and switch ports successfully tested with other devices, got about 980Mbps bandwidth).

All 11 AP are "Portal" and have the eth0 interface in Backhaul.

Using iperf (or wifi connection with a tx rate @230Mbps, 5Ghz, 40Mhz) I have less than 100Mbps bandwidth.

I tested iperf between AP devices and between AP device and iperf server(or client) in LAN. Both TCP and UDP.

Network interface is autosensing and it detect 1000Mbps on both switch and aerohive AP141 devices.

I did another test:

forcing the port to 100mbps full duplex (device and switch port), the bandwidth is about 10Mbps.

Monitoring the port traffic, the bandwith is the one reported by iperf, so no Iperf issues here.

This happens on all devices.

Any clue?

giorgio_marzian — Fri, 08 Jun 2018 19:22:05 GMT

Before asking, the HiveOS version is 6.5r9a.194750

dsouri — Wed, 27 Jun 2018 03:14:31 GMT

Hello @Giorgio Marziani de Paolis ,

I am sorry I am just now seeing this post.

It also appears I am working on this exact issue in a support ticket for your Hivemanager.

Happy to answer any questions, and will continue to work on case 240609 with Sam.

David Souri

HiveCommunity Moderator

IT-Experience — Mon, 17 Oct 2022 19:17:29 GMT

Hi, i have the same problem, what was the solution provided?

IT-Experience — Tue, 18 Oct 2022 14:12:49 GMT

Hi, my current version is 10.4.4.0

The problem persit.

IT-Experience — Wed, 19 Oct 2022 19:11:41 GMT

Hi, any news?? i Have a big problem, thnks.

IT-Experience — Thu, 20 Oct 2022 16:21:49 GMT

Hi, Is it possible to help me with this problem?