Can I pull a full config from an AP from the CLI that includes the local users?

dstevenson — Thu, 05 Dec 2019 15:22:04 GMT

I have a couple of old AP-121s that I'm using in my home lab. I have them set up with a single SSID doing 4 local PPSK users. They aren't connected to hivemanager any more so I have to configure them from the CLI. One of them defaulted the configuration and needs to be rebuilt. I tried rebuilding the configuration from the working AP, but when I look at my local users, I see the username, I see the user group they are associated to, but under the valid column it says no. I want the two APs to be configured the same minus the management IP. Is there a way I can pull the full configuration with the users, user profiles, and user group associations in tact, or can someone point me to why the user would be showing invalid?

Thanks!

Re: Can I pull a full config from an AP from the CLI that includes the local users?

dstevenson — Thu, 05 Dec 2019 16:54:32 GMT

So it appears to have just been an order of operations thing. I had been copying out the config line-by-line which seemed to create my SSID and user group and profile. I tried creating the user-profile first, then the profile-group, and then the user before creating the SSID. This showed the users as valid yes when I run a "show user" in the CLI. I then copied in my SSID and I authenticated.

topic Re: Can I pull a full config from an AP from the CLI that includes the local users? in Aerohive Migrated Content

Can I pull a full config from an AP from the CLI that includes the local users?

Re: Can I pull a full config from an AP from the CLI that includes the local users?