topic Delay performance of eth1 port bridging mode in Aerohive Migrated Content https://community.extremenetworks.com/t5/aerohive-migrated-content/delay-performance-of-eth1-port-bridging-mode/m-p/7209#M353 <P>I have set eth1 to bridge mode with my AP230,and the desktop connected to the port works well.But I have something weird,I run ping command from the desktop to the gateway(local LAN),received about 10ms.And then,I run ping command from the AP230 CLI,received &lt;1ms.</P><P>I use 12V power adapter for my AP230.</P> Wed, 14 Nov 2018 09:22:00 GMT neroanelli 2018-11-14T09:22:00Z Delay performance of eth1 port bridging mode https://community.extremenetworks.com/t5/aerohive-migrated-content/delay-performance-of-eth1-port-bridging-mode/m-p/7209#M353 <P>I have set eth1 to bridge mode with my AP230,and the desktop connected to the port works well.But I have something weird,I run ping command from the desktop to the gateway(local LAN),received about 10ms.And then,I run ping command from the AP230 CLI,received &lt;1ms.</P><P>I use 12V power adapter for my AP230.</P> Wed, 14 Nov 2018 09:22:00 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/delay-performance-of-eth1-port-bridging-mode/m-p/7209#M353 neroanelli 2018-11-14T09:22:00Z RE: Delay performance of eth1 port bridging mode https://community.extremenetworks.com/t5/aerohive-migrated-content/delay-performance-of-eth1-port-bridging-mode/m-p/7210#M354 <P>Other Servers from the LAN received &lt;1ms when ping to the AP except the one connect ed to eth1.</P> Wed, 14 Nov 2018 09:26:00 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/delay-performance-of-eth1-port-bridging-mode/m-p/7210#M354 neroanelli 2018-11-14T09:26:00Z