topic Re: How do I configure a VLAN using HiveManager Connect. I have a guest and a corporate SSID, I would like to separate the date using VLANs. in Aerohive Migrated Content

How do I configure a VLAN using HiveManager Connect. I have a guest and a corporate SSID, I would like to separate the date using VLANs.

mjones2 — Fri, 30 Nov 2018 01:33:02 GMT

How do I configure a VLAN using HiveManager Connect. I have a guest and a corporate SSID, I would like to separate the date using VLANs.

Re: How do I configure a VLAN using HiveManager Connect. I have a guest and a corporate SSID, I would like to separate the date using VLANs.

samantha_lynn — Fri, 30 Nov 2018 02:17:17 GMT

You can set the VLAN for the SSID in the user profile. So in the guest SSID you'd set a different VLAN in the user profile than in the corporate SSID user profile. To get to the User Profile you will want to go to Configure> Open the Network Policy> Open the SSID> User Profile is on this page.

Re: How do I configure a VLAN using HiveManager Connect. I have a guest and a corporate SSID, I would like to separate the date using VLANs.

larry1 — Sat, 15 Jun 2019 18:39:43 GMT

When I followed Sam's instructions, the SSID was created with a VLAN, but when I try to connect to it I just get an error saying I can't get an IP. Is there somewhere else you need to go to get the VLAN fully setup to access DHCP?

Re: How do I configure a VLAN using HiveManager Connect. I have a guest and a corporate SSID, I would like to separate the date using VLANs.

ashley_finch — Mon, 17 Jun 2019 15:30:01 GMT

Hi Larry,

Has the switch/DHCP server been set up correctly to allow that VLAN/IP subnet? Can you run a VLAN probe either through the HiveManager or through the CLI (interface mgt0 dhcp-probe vlan-range <number> <number>) to see the AP can find a DHCP server on that VLAN?