topic Re: What is the power draw of an AP1130? in Aerohive Migrated Content

What is the power draw of an AP1130?

AnonymousM — Thu, 11 Oct 2018 19:20:10 GMT

What is the power draw of an AP1130?

bruce_stahlin — Fri, 12 Oct 2018 02:55:06 GMT

The spec sheet has it listed as 802.3at with 12V DC input:

https://www.aerohiveworks.com/datasheets/Aerohive-Datasheet-AP1130.pdf

It is rated for 802.3at, which supports up to 25.5W of power.

bruce_stahlin — Fri, 12 Oct 2018 03:09:03 GMT

I ran a sh lldp command on one of ours:

LLDP general information

----------------------------

Enabled: yes

Number of LLDP neighbors: 1

Max number of LLDP neighbors: 64

Sending LLDP packets interval (seconds): 30

Sending a holdtime value (seconds): 90

Sending a required power value (watt): 15.4

from the connected switch; sh poe port info (interface):

High Max Output Output

Intf Power Power Class Power Current Voltage Temperature Status Fault

(mW) (mW) (mA) (V) (C) Status

------ ------- -------- -------- ------- ------- ------- ----------- ----------------- -----------------

1/0/45 Yes 30000 4 6700 130 52 35 Delivering Power No Error

AnonymousM — Fri, 12 Oct 2018 16:24:51 GMT

I knew that 802.3at was necessary, but the 15.4 watt was the info that I need.

Thank you so much!