topic Re: how to disable inter-station-traffic on AP via HiveManager? in Aerohive Migrated Content

how to disable inter-station-traffic on AP via HiveManager?

tim_seiffert1 — Thu, 27 Sep 2018 18:42:22 GMT

earlier it was possible to disable inter-station-traffic when editing traffic filter settings of a network policy. Now the last time I did this was around 2 years ago, it seems the option "Enable Inter-Station traffic" has vanished. Is there any reason behind? How can I change it since it's enabled by default?

Re: how to disable inter-station-traffic on AP via HiveManager?

samantha_lynn — Thu, 27 Sep 2018 18:48:41 GMT

To disable inter-station traffic you would want to go to Configure> Open the Network Policy> Open the SSID> Expand Additional Settings within the SSID> Customize the Optional Settings> Look for the third section over called Traffic Filters, and you should see the last check box in this section that says "Enable Inter-Station Traffic". This is checked by default but you can of course uncheck it if you'd like. Is that what you were looking for?

Re: how to disable inter-station-traffic on AP via HiveManager?

tim_seiffert1 — Thu, 27 Sep 2018 18:52:27 GMT

yes, that was it. Thank you.