topic How could I configure unicast sharing information between access points ? in Aerohive Migrated Content https://community.extremenetworks.com/t5/aerohive-migrated-content/how-could-i-configure-unicast-sharing-information-between-access/m-p/7353#M497 <P>In march 2017, we opened a case about AP issues, one of the answer was to : We can change the way they exchange information, and configure them to use&nbsp;unicast&nbsp;only with their radio neighbors instead of broadcast with everyone. According to Aerohive, this will have no negative impact on the service but it should reduce dramatically the CPU load - and fix the few instability problem you recently observed.&nbsp;"</P><P>&nbsp;</P><P>How can I configure unicast exchanges between neighbors ? </P><P>&nbsp;</P> Thu, 25 Oct 2018 19:50:00 GMT yves_premelcabi 2018-10-25T19:50:00Z How could I configure unicast sharing information between access points ? https://community.extremenetworks.com/t5/aerohive-migrated-content/how-could-i-configure-unicast-sharing-information-between-access/m-p/7353#M497 <P>In march 2017, we opened a case about AP issues, one of the answer was to : We can change the way they exchange information, and configure them to use&nbsp;unicast&nbsp;only with their radio neighbors instead of broadcast with everyone. According to Aerohive, this will have no negative impact on the service but it should reduce dramatically the CPU load - and fix the few instability problem you recently observed.&nbsp;"</P><P>&nbsp;</P><P>How can I configure unicast exchanges between neighbors ? </P><P>&nbsp;</P> Thu, 25 Oct 2018 19:50:00 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/how-could-i-configure-unicast-sharing-information-between-access/m-p/7353#M497 yves_premelcabi 2018-10-25T19:50:00Z RE: How could I configure unicast sharing information between access points ? https://community.extremenetworks.com/t5/aerohive-migrated-content/how-could-i-configure-unicast-sharing-information-between-access/m-p/7354#M498 <P>Unicast to multicast conversion is in the SSID settings. If you can let me know which HiveManager version you are using, I can give you specific instructions on how to find this setting; HiveManager Classic (myhive.aerohive.com) or HiveManager (formerly NG, cloud.aerohive.com).</P> Thu, 25 Oct 2018 21:44:00 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/how-could-i-configure-unicast-sharing-information-between-access/m-p/7354#M498 samantha_lynn 2018-10-25T21:44:00Z