topic Re: SR2024P aggregate ports in Aerohive Migrated Content

SR2024P aggregate ports

bruce_stahlin — Thu, 23 Aug 2018 01:54:23 GMT

We're migrating from on-prem to cloud (formerly NG). In classic we could aggregate ports on a 2024P. We've not found that option available in the cloud.

Re: SR2024P aggregate ports

GeorgiaMason — Thu, 23 Aug 2018 03:57:04 GMT

They don't have that option in there right now, but I think you can still do it via supplemental CLI if you know the commands to set that up.

Re: SR2024P aggregate ports

bruce_stahlin — Thu, 23 Aug 2018 06:43:11 GMT

It would be a nice feature to bring back.

For those that may need it in the future, here is a sample cli config:

agg 1

interface eth1/25 agg 1

interface eth1/26 agg 1

agg 2

interface eth1/27 agg 2

interface eth1/28 agg 2

interface agg1 switchport mode trunk

interface agg1 switchport trunk allow vlan 1

interface agg1 switchport trunk allow vlan 2

interface agg1 switchport trunk allow vlan 3

interface agg2 switchport mode trunk

interface agg2 switchport trunk allow vlan 4

interface agg2 switchport trunk allow vlan 5

interface agg2 switchport trunk allow vlan 6