https://community.extremenetworks.com/t5/aerohive-migrated-content/how-to-shorten-the-refresh-time-of-the-ap-status-in-the/m-p/72332#M5427 <P>I noticed that the refresh time of the AP status is long (about 1-2 minutes) in the Hivemanager.</P><P>How to shorten this delay and have a state almost in real time?</P> Thu, 13 Sep 2018 20:25:10 GMT vb 2018-09-13T20:25:10Z https://community.extremenetworks.com/t5/aerohive-migrated-content/how-to-shorten-the-refresh-time-of-the-ap-status-in-the/m-p/72332#M5427 <P>I noticed that the refresh time of the AP status is long (about 1-2 minutes) in the Hivemanager.</P><P>How to shorten this delay and have a state almost in real time?</P> Thu, 13 Sep 2018 20:25:10 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/how-to-shorten-the-refresh-time-of-the-ap-status-in-the/m-p/72332#M5427 vb 2018-09-13T20:25:10Z https://community.extremenetworks.com/t5/aerohive-migrated-content/how-to-shorten-the-refresh-time-of-the-ap-status-in-the/m-p/72333#M5428 <P>Since we are a controler-less environment, this means that the APs can operate independently of the HiveManager. While this means that the APs will continue to operate as normal if they lose connection with the HiveManager, it also means they are not constantly in touch with the HiveManager, so reporting can take a few minutes. Any latency on the network will increase this delay. If you have an on premises HiveManager hosted on your own network, this could also shorten the communication time between the APs and the HiveManager. </P> Thu, 13 Sep 2018 23:01:05 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/how-to-shorten-the-refresh-time-of-the-ap-status-in-the/m-p/72333#M5428 samantha_lynn 2018-09-13T23:01:05Z