topic RE: BLE information output in Aerohive Migrated Content

BLE information output

AnonymousM — Wed, 24 Oct 2018 20:10:00 GMT

Hi,

first of all, sorry for my bad english ,

I've enabled "iBeacon Services" & "ibeacon Monitoring" under a network policy.

I see my beacon device under Monitor->Proximity & via ssh with this command:

Test-BL3#sh int ble0 ibeacon-monitor list

Sender RSSI UUID Major Minor Measured Power Last Update Time

------------ -------- -------------------------------- ----- ----- -------------- --------------------

d0669e491274 -65 dBm f7826da64fa24e988024bc5b71e0893a 44600 21826 -59 2018-10-24 15:02:06

5c5b352e7eb1 -93 dBm 307d172ff172499badc26f50fd22c807 5 65535 0 2018-10-24 15:02:06

5c5b352e6fac -77 dBm 307d172ff172499badc26f50fd22c802 5 65535 -60 2018-10-24 15:02:06

5c5b352e7ea2 -59 dBm 307d172ff172499badc26f50fd22c837 5 15312 -60 2018-10-24 15:02:06

Item Count: 4

Test-BL3#

Is it possible to have a log about the "connection" and "disconnection" of the ble-device in real time ?

Thanks in advance

Regards

Federico

RE: BLE information output

samantha_lynn — Thu, 25 Oct 2018 03:51:00 GMT

That information should populate in the buffered log, which does overwrite itself after a certain amount of data, so you'd want to set up a syslog server to gather this information long term.

RE: BLE information output

AnonymousM — Thu, 25 Oct 2018 17:07:00 GMT

Hi Sam,

thanks for your answer.

Do you know how to extrapolate this type of data from the buffered log ?

Via CLI, if I do "sh logging buffered" I see nothing that can concern ble information.

Thanks for the help

Federico

RE: BLE information output

AnonymousM — Thu, 25 Oct 2018 17:53:00 GMT

Hi Sam,

sorry, maybe i found the way..

I enabled the debug of ibeacon...

Thanks again

Ciao

Federico