topic Re: It´s possible to disable standard 802.11a in an Aerohive deployment? in Aerohive Migrated Content

It´s possible to disable standard 802.11a in an Aerohive deployment?

hector_rios — Fri, 17 Aug 2018 10:01:16 GMT

I want to disable standard 802.11a because after a air quality test the result shows that 802.11a from Aerohive is affecting the wireless service

Re: It´s possible to disable standard 802.11a in an Aerohive deployment?

samantha_lynn — Sat, 18 Aug 2018 06:20:18 GMT

You'll want to see what your options are in the radio profile, if you can tell me the AP model and HiveManager platform you are using, I can give you more details.

Re: It´s possible to disable standard 802.11a in an Aerohive deployment?

hector_rios — Sat, 18 Aug 2018 06:29:08 GMT

Thanks for your answer, I was looking in radio profile but I can´t find the option. I have access point AP230 (HiveOS 8.2r3.199573) with Hive Manager Classic (8.2r2). Thanks.

Re: It´s possible to disable standard 802.11a in an Aerohive deployment?

samantha_lynn — Mon, 20 Aug 2018 19:36:58 GMT

Hi Hector, sorry for the confusion. You're looking for the Radio Mode, should be at the top of the Radio Profile page without expanding any of the sub-sections. You're options are going to be : 802.11g/n, 802.11b/g, 802.11a, 802.111/n, 802.11g/n, 802.11 a/n/ac. Is this what you are looking for?

Re: It´s possible to disable standard 802.11a in an Aerohive deployment?

hector_rios — Tue, 21 Aug 2018 20:41:12 GMT

Hi Sam, I found that options in Radio Profile but noone of them disable 802.11a at all. In this moment I have configure for radio 2.4GHz a radio profile with radio mode 802.11g/n and that is OK, but for 5GHz the radio mode is 802.11a/n/ac and I can't find an option without standard 802.11a. Thanks.

Re: It´s possible to disable standard 802.11a in an Aerohive deployment?

nlowe — Tue, 21 Aug 2018 20:53:02 GMT

Hi Hector,

The 802.11a defined OFDM rates are mandatory at 5 GHz so you cannot disable these outright.

However, you can prohibit clients that only support 802.11a so that clients must be 802.11n capable.

Regards,

Nick