https://community.extremenetworks.com/t5/aerohive-migrated-content/from-a-wlc-controller-how-i-am-able-to-see-the-switch-which/m-p/74595#M6326 From a WLC controller how I am able to see the switch which access points are connected to Fri, 01 Nov 2019 14:19:14 GMT michael_tande 2019-11-01T14:19:14Z https://community.extremenetworks.com/t5/aerohive-migrated-content/from-a-wlc-controller-how-i-am-able-to-see-the-switch-which/m-p/74595#M6326 From a WLC controller how I am able to see the switch which access points are connected to Fri, 01 Nov 2019 14:19:14 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/from-a-wlc-controller-how-i-am-able-to-see-the-switch-which/m-p/74595#M6326 michael_tande 2019-11-01T14:19:14Z https://community.extremenetworks.com/t5/aerohive-migrated-content/from-a-wlc-controller-how-i-am-able-to-see-the-switch-which/m-p/74596#M6327 <P>That information isn't displayed in the GUI but you should be able to find it with the command "show arp switch". It does depend a bit on which switch model you're using though, the commands are a bit different between the SR2000/SR2100 and the SR2200/SR2300 series switches. </P> Fri, 01 Nov 2019 20:14:10 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/from-a-wlc-controller-how-i-am-able-to-see-the-switch-which/m-p/74596#M6327 samantha_lynn 2019-11-01T20:14:10Z