topic Re: Is it possible to configure a single port on a 2124P for 100Mbps only? in Aerohive Migrated Content

Is it possible to configure a single port on a 2124P for 100Mbps only?

kevin_johnson — Thu, 09 Jan 2020 23:09:22 GMT

Is it possible to configure a single port on a 2124P for 100Mbps only?

samantha_lynn — Fri, 10 Jan 2020 23:06:57 GMT

You can create an aggregate port on a 2124P switch, is that what you're looking for?

kevin_johnson — Fri, 10 Jan 2020 23:15:10 GMT

No. I actually want to take a single port and configure it to 100Mbs rather than 1Gbps.

ashley_finch — Fri, 10 Jan 2020 23:27:34 GMT

If it's the same as the SR224P you should be able to do this by doing the following (presuming you're on a HiveManager NG/ExtremeCloud IQ Platform):

Monitor/Manage Tab > Click on the switch > Configure > port configuration > port settings > (find the port) > Speed 100.

ashley_finch — Fri, 10 Jan 2020 23:32:48 GMT

Or for completeness if you're on HiveManager Classic:

Monitor > Tick the box next to the switch > Modify > Switch Ethernet Port Settings > (find the port) > Speed 100 > save > update.