How can I configuration AP250 for access manager

yeomin — Thu, 16 Jan 2020 15:07:34 GMT

I bought 4 aerohive AP250. But, I don't know how to configurations.

my config are below.

AH-518e40#show config running

no system led power-saving-mode

interface mgt0 ip 10.230.10.235 255.255.255.0

ip route net 0.0.0.0 0.0.0.0 gateway 10.230.10.1

no interface mgt0 dhcp client

dns server-ip 8.8.8.8

capwap client server port 80

capwap client server name 10.230.10.234

capwap client transport HTTP

And capwap config are below.

AH-518e40#show capwap client

CAPWAP client: Enabled

CAPWAP transport mode: HTTP on TCP

DISCOVERY state: Sending Discovery packets to find the CAPWAP server

CAPWAP client IP: 10.230.10.235

CAPWAP server IP: 54.172.0.252

HiveManager Primary Name:10.230.10.234

HiveManager Backup Name:

CAPWAP Default Server Name: redirector.aerohive.com

Virtual HiveManager Name:

Server destination Port: 80

CAPWAP send event: Enabled

CAPWAP DTLS state: Enabled

CAPWAP DTLS negotiation: Enabled

DTLS next connect status: Enable

DTLS always accept bootstrap passphrase: Enabled

DTLS session status: Disconnect

DTLS key type: passphrase

DTLS session cut interval: 5 seconds

DTLS handshake wait interval: 60 seconds

DTLS Max retry count: 3

DTLS authorize failed: 0

DTLS reconnect count: 0

If I want access manager, How can I do that?

unable to access 10.230.10.234

Re: How can I configuration AP250 for access manager

samantha_lynn — Thu, 16 Jan 2020 23:51:55 GMT

This guide reviews how to manually connect a device to your on premises HiveManager, is that what you were looking for?

https://thehivecommunity.aerohive.com/s/article/CAPWAP-Guide-for-On-Premises

Re: How can I configuration AP250 for access manager

yeomin — Sun, 19 Jan 2020 14:17:07 GMT

I solved that and downloaded the manager programs. Thank you for your help.

topic Re: How can I configuration AP250 for access manager in Aerohive Migrated Content

How can I configuration AP250 for access manager

Re: How can I configuration AP250 for access manager

Re: How can I configuration AP250 for access manager