topic Re: Compatibility of AP122 with Netgear POE switch that has IEEE 802.3af (DTE Power Via MDI) in Aerohive Migrated Content

Compatibility of AP122 with Netgear POE switch that has IEEE 802.3af (DTE Power Via MDI)

hsamarth1 — Mon, 03 Jun 2019 19:40:27 GMT

Hi, there is a Netgear POE switch on which Aerohive AP122 will be connected but the POE switch has IEEE 802.3af (DTE Power Via MDI) mentioned in its protocol, so will the AP122 be compatible to draw power from this switch?

Regards

Re: Compatibility of AP122 with Netgear POE switch that has IEEE 802.3af (DTE Power Via MDI)

samantha_lynn — Mon, 03 Jun 2019 20:42:19 GMT

The AP122 can work with af power, per the datasheet for that model, under the power section: https://www.aerohive.com/wp-content/uploads/Aerohive_Datasheet_AP122.pdf

Re: Compatibility of AP122 with Netgear POE switch that has IEEE 802.3af (DTE Power Via MDI)

hsamarth1 — Tue, 04 Jun 2019 08:59:06 GMT

Hi Sam,

Thanks for the response but does DTE Power Via MDI has anything to do with the compatibility??

Regard

Re: Compatibility of AP122 with Netgear POE switch that has IEEE 802.3af (DTE Power Via MDI)

samantha_lynn — Thu, 13 Jun 2019 23:46:13 GMT

Thanks for your patience while we looked in to this for you, the DTW power via MDI should not matter to our devices, they will receive power from that switch.

Re: Compatibility of AP122 with Netgear POE switch that has IEEE 802.3af (DTE Power Via MDI)

hsamarth1 — Mon, 17 Jun 2019 13:29:27 GMT

Thanks Sam for confirming.