topic Re: Port forwarding XR200P to in Aerohive Migrated Content

Port forwarding XR200P to

is_krem — Thu, 28 Feb 2019 17:33:14 GMT

Hello. I'm trying to configure homelab to allow inbound traffic on port 32400 to a PLEX server.

Internet > Bridge Modem > XR200P > SR2208P > PLEX

I am unable to get this to work. I first started without any firewall configuration and default user profile. I have now created a new user profile which is applied to all devices (confirmed by HiveManager monitor), but it is still not working. So I am wondering if there is anything I have forgotten, or any settings I also need to configure further?

Thanks in advanced.

Re: Port forwarding XR200P to

AnonymousM — Fri, 01 Mar 2019 05:09:08 GMT

You would configure the Port Forwarding in the individual device's configuration. Monitor > Select desired device > Additional Device Settings > Port Forwarding

There are no additional settings required within the network policy in order for this to work appropriately. What Outside port, local port and protocol do you have configured in your rule?

Re: Port forwarding XR200P to

is_krem — Fri, 01 Mar 2019 23:22:51 GMT

I managed to get it working after an unexpected reboot due to power. So now it's working at least.

Is there any CLI commands to do a "manual" refresh of configuration to avoid having to reboot?

Re: Port forwarding XR200P to

is_krem — Fri, 01 Mar 2019 23:30:35 GMT

Nevermind, when I test the connection it fluctuates between working/not working.

Re: Port forwarding XR200P to

is_krem — Fri, 01 Mar 2019 23:46:26 GMT

Okay, so I reverted the user profile on Access Port on XR200P back to default-profile and now it seems to be working as intended.

Re: Port forwarding XR200P to

AnonymousM — Sat, 02 Mar 2019 01:48:10 GMT

You can push a Delta update from the GUI. This basically just applies the CLI commands to the AP without rebooting. Major adjustments to the configuration require a Complete update. If you push a Delta update and it fails, you likely need to push a Complete.