topic Re: we have disabled smbv1 on our Domaincontrollers. Now we have problems in our aerohive enviroment. in Aerohive Migrated Content

we have disabled smbv1 on our Domaincontrollers. Now we have problems in our aerohive enviroment.

hinterndorfer — Mon, 24 Sep 2018 20:34:44 GMT

When we check the Domain User Credentials in the AAA User Directory Settings the follow error message appears:

Unknown error: could not obtain winbind separator! Reading winbind reply failed! (0x01) :

Is it possible to config Aerohive tu use SMBv2 oder later ???

hinterndorfer — Mon, 24 Sep 2018 21:32:22 GMT

we use HiveManager 8.2r2 and AP330 with 6.5.R10 Firmware

AnonymousM — Tue, 25 Sep 2018 14:28:38 GMT

Hi,

I would recommend using another AP, anything that can use 8.2x firmware.

SMBv2 was added to HiveOS 8.2r1, I don't know if it is available for the 6.5rX releases.

Release notes:

AnonymousM — Tue, 25 Sep 2018 14:28:56 GMT

https://docs.aerohive.com/330000/docs/help/english/documentation/8.2r1_HiveOS_ReleaseNotes.pdf

hinterndorfer — Tue, 25 Sep 2018 16:36:01 GMT

thx for your answer - we have one ap with 8.2x Firmware  - we changed the authentication to this ap und now all is working.