topic Re: How to configure Proxy Radius in HiveManagerNG? in Aerohive Migrated Content

How to configure Proxy Radius in HiveManagerNG?

carlos_sanz — Tue, 02 Oct 2018 16:26:46 GMT

Hello:

Anyone know how to configure Proxy Radius in HiveManager NG, because I only find documentation of the Clasic version.

Regards,

Carlos Sanz

Re: How to configure Proxy Radius in HiveManagerNG?

samantha_lynn — Wed, 03 Oct 2018 00:03:37 GMT

When you push a configuration out that requires a Radsec proxy connection to the IDM servers, two APs will be automatically elected as the proxy APs. If one goes down, another will be selected to take it's place. You can tell which AP is the radsec proxy by running the command "show idm".

Re: How to configure Proxy Radius in HiveManagerNG?

w1f1n00b — Tue, 16 Jul 2019 03:11:01 GMT

Safe to assume this would be the case if using a Cloud DB for a PPSK user group?

If so, any idea why apx half (of 100) of my APs are currently showing the "RADSEC proxy server" icon after adding the PPSK SSID to the network policy and pushing the delta?

Re: How to configure Proxy Radius in HiveManagerNG?

w1f1n00b — Tue, 16 Jul 2019 03:15:38 GMT

I just pushed it to a second location via a seperate network policy and it's only showing on two APs as expected.

This is in Hivemanager (formerly NG) with AP550's on 8.2r4.

The site mentioned above is also AP550's but with a mix of 8.2r4 and 10.0r5, however there doesn't seem to be any rhyme or reason as to why some have the icon and others don't.

Re: How to configure Proxy Radius in HiveManagerNG?

samantha_lynn — Tue, 16 Jul 2019 03:17:49 GMT

It will elect per location, before you just added the new location, were we working with a single location or multiple?

Re: How to configure Proxy Radius in HiveManagerNG?

w1f1n00b — Tue, 16 Jul 2019 03:21:51 GMT

Right now I have a separate network policy for each of my physical locations. I noticed the issue with the multiple icons, so to see if it would continue I pushed similar changes to a separate location/network policy. Currently I have 3 locations total using this PPSK SSID with the Cloud DB user group.

There are over 50 APs at the first location showing the RADSEC icon.

Re: How to configure Proxy Radius in HiveManagerNG?

samantha_lynn — Tue, 16 Jul 2019 03:45:08 GMT

That is odd. Just off the top of my head I'd say if there is something blocking the APs from talking to each other then they might believe they need more Rad sec servers, but that's just a guess at this point. I would recommend opening a technical support case to investigate that further with our engineers.