topic RE: AP130 Update Failed in Aerohive Migrated Content

AP130 Update Failed

Cristian — Fri, 26 Oct 2018 10:49:00 GMT

Good morning,

I am in the process of initial configure an AP130, but I am getting the follow error AP130 - Device Update Failed.

Device added into AeroHive cloud and rebooted as advised but is not operational. Can't deploy it. LED moved from orange to white, then orange and then goes off.

I appreciate your assistance.

Best regards,

Cristian Perilla

RE: AP130 Update Failed

samantha_lynn — Fri, 26 Oct 2018 21:35:00 GMT

If you click on the Device Update Failed blue text on the Monitor page, could you tell me what it says is the reason for the failure?

RE: AP130 Update Failed

Cristian — Tue, 30 Oct 2018 05:43:00 GMT

Hi Sam,

Thank you for our assistance. It was found that the firmware was quite old (6.5r1b) and it did not support to connect to the current HVManager so it could not be updated. It was required to push the new firmware locally from a TFTP server. It's all working now.

Cheers

RE: AP130 Update Failed

YKY — Wed, 16 Feb 2022 11:05:00 GMT

I got the same error too, would you please send me the firmware file so i can upload on it locally?

thanks,
YK