topic Re: At a site there are 6 AP230s. Two of them are close to each other but they can't hear each other under 2.4 and 5GHZ. have reboot them a couple of times and still no luck. in Aerohive Migrated Content

At a site there are 6 AP230s. Two of them are close to each other but they can't hear each other under 2.4 and 5GHZ. have reboot them a couple of times and still no luck.

alden_xu — Tue, 03 Sep 2019 08:38:52 GMT

At a site there are 6 AP230s. Two of them are close to each other but they can't hear each other under 2.4 and 5GHZ. have reboot them a couple of times and still no luck.

Re: At a site there are 6 AP230s. Two of them are close to each other but they can't hear each other under 2.4 and 5GHZ. have reboot them a couple of times and still no luck.

ashley_finch — Tue, 03 Sep 2019 16:23:31 GMT

If you do a 'show int wifi0' and 'show int wifi1' are they missing background scans? - Look for the row that shows Number of BGSCAN= ....and you can see the number of BGSCANs requested vs the number of BGSCANs missed.

What is the main goal of making them see each other, i.e. is there an issue you're looking to solve? Are you able to connect to these APs? Also what is the tx power of the interfaces?

Re: At a site there are 6 AP230s. Two of them are close to each other but they can't hear each other under 2.4 and 5GHZ. have reboot them a couple of times and still no luck.

alden_xu — Wed, 04 Sep 2019 02:33:20 GMT

here it is: Number of BGSCAN=0; Number of BGSCAN requested=232; Number of BGSCAN missed=231.

I do see lots of Aerohive APs having these 0 BGSCAN.

Re: At a site there are 6 AP230s. Two of them are close to each other but they can't hear each other under 2.4 and 5GHZ. have reboot them a couple of times and still no luck.

ashley_finch — Wed, 04 Sep 2019 16:02:36 GMT

That there would be you issue as to why the acsp neighbor table is not populating if it is missing all of the scans.

What are the background scan settings in the radio profiles being used?

Re: At a site there are 6 AP230s. Two of them are close to each other but they can't hear each other under 2.4 and 5GHZ. have reboot them a couple of times and still no luck.

alden_xu — Wed, 04 Sep 2019 16:08:55 GMT

Enable background scanning when there are clients connected and disable background scanning when connected clients are in a power-save state

Re: At a site there are 6 AP230s. Two of them are close to each other but they can't hear each other under 2.4 and 5GHZ. have reboot them a couple of times and still no luck.

alden_xu — Thu, 10 Oct 2019 02:30:24 GMT

5GHZ scan across many AP230 is very big problem for us. no scan and the information on the AP I think will be wrong.

The information I get is: Number of BGSCAN=0; Number of BGSCAN requested=232; Number of BGSCAN missed=231.

I have enabled all the backgroud settings if possible. We are using 6.5r8 goden version

Re: At a site there are 6 AP230s. Two of them are close to each other but they can't hear each other under 2.4 and 5GHZ. have reboot them a couple of times and still no luck.

alden_xu — Thu, 10 Oct 2019 12:36:51 GMT

Also what type of the informtion can get from each scan?