topic syslog configuration. in Aerohive Migrated Content

syslog configuration.

gmoody — Thu, 28 Feb 2019 01:35:15 GMT

syslog configuration.

Re: syslog configuration.

gmoody — Thu, 28 Feb 2019 01:37:01 GMT

I have configured syslog yet I am seeing no output from the HiveManager for syslog. What am I missing?

Re: syslog configuration.

sderikonja1 — Thu, 28 Feb 2019 04:51:10 GMT

Assign syslog profile to network policy and then push config out to APs.

Re: syslog configuration.

gmoody — Thu, 28 Feb 2019 04:59:29 GMT

Thanks for any help.

I have. I added it under Configuration -> Advanced Configuration -> Management Services -> Syslog Assignments, and then I applied it under Network Policies -> MyPolicy -> Additional Settings -> Management Server Settings. Still it is not sending any information to my syslog server that is currently receiving syslog information from many of my systems.

Re: syslog configuration.

sderikonja1 — Thu, 28 Feb 2019 05:24:25 GMT

Right, that would be HiveManager Classic. What is the HiveOS version that you are running?

Re: syslog configuration.

gmoody — Thu, 28 Feb 2019 06:19:30 GMT

We are running 8.2r2.

Re: syslog configuration.

sderikonja1 — Thu, 28 Feb 2019 06:24:49 GMT

Depending on your syslog implementation I would start with a packet capture to make sure packets are being sent by APs and received by syslog server.

Re: syslog configuration.

gmoody — Thu, 28 Feb 2019 06:42:02 GMT

I have a port monitor on the switch that the hive manager is connected to because I thought the syslog information was going to come from it. Tomorrow I will put one on an AP and see what Wireshark gets. I will let you know first thing tomorrow.

Thanks

Re: syslog configuration.

sderikonja1 — Thu, 28 Feb 2019 23:45:15 GMT

@Gerald Moody I do not believe HiveManager has the option to forward syslog messages. Techs can correct me if I am wrong. The syslog settings in HiveManager Classic and NG pertain to Access Points.

Re: syslog configuration.

gmoody — Fri, 01 Mar 2019 00:36:58 GMT

I changed it to another server this morning. I applied the policy; resent the config to an AP and then the syslog server started showing the information from the AP.

Thanks for the information and help,

Gerald