Authentication issues when running Radius on the AP

jorge_diaz — Thu, 10 Oct 2019 01:11:56 GMT

Hi there, I"m reaching out to the community and hopefully other engineers as I can't wrap my around this. I configured a 250 AP as a radius server, I"m using Windows Active directory for in the back end for user authentication. When i create users account in AD and assign the password connection to the WiFi network works fine. If I set the option for the users to change the password at the net log on users are not able to connect to the WiFi. This is not an AD issue because if I run windows radius (NPS) users have the ability to change the password when connecting to the WiFi. Is there a setting that needs to be enabled on the AP Radius function that will allow users to change the password when authenticating over the WiFi network??? Below is capture showing that users can't login because the password must be changed..

thanks..

(3113)RADIUS: PEAP Tunneled authentication was rejected. NTLM_auth failed for Must change password (0xc0000224)

Re: Authentication issues when running Radius on the AP

samantha_lynn — Thu, 10 Oct 2019 02:43:45 GMT

Unfortunately you would have to use NPS to have that feature, it is not something we'll be able to support via an Aerohive AP acting as a Radius server.

Re: Authentication issues when running Radius on the AP

jorge_diaz — Tue, 15 Oct 2019 02:44:16 GMT

Thank you. that settles it..

topic Authentication issues when running Radius on the AP in Aerohive Migrated Content

Authentication issues when running Radius on the AP

Re: Authentication issues when running Radius on the AP

Re: Authentication issues when running Radius on the AP