topic Re: AP250: The old certificate is expired and no longer available in Aerohive Migrated Content

AP250: The old certificate is expired and no longer available

s_vollmann — Fri, 31 Jan 2020 23:19:23 GMT

AP250: The old certificate is expired and no longer available

Re: AP250: The old certificate is expired and no longer available

samantha_lynn — Mon, 03 Feb 2020 20:59:47 GMT

Where are you seeing this message? And could you tell me what firmware you're using on the 250?

Re: AP250: The old certificate is expired and no longer available

s_vollmann — Tue, 04 Feb 2020 16:14:31 GMT

The message appears after login to ExtremeCloudIQ.

The firmware: HiveOS 8.2r5 build-221111

Greetings Stephan

Re: AP250: The old certificate is expired and no longer available

samantha_lynn — Tue, 04 Feb 2020 20:15:28 GMT

Thank you for letting me know. Would you be able to update to the latest HiveOS version for the AP250, 10.0r7a, to see if that error remains?

Re: AP250: The old certificate is expired and no longer available

s_vollmann — Tue, 04 Feb 2020 22:16:56 GMT

It is a demo device. We can't change that. So an update is not possible. I'm sorry.

Is it possible to assign an SSID to the access point for 2.4 and 5 GHz without ExtremeCloud?

Re: AP250: The old certificate is expired and no longer available

samantha_lynn — Wed, 05 Feb 2020 00:13:43 GMT

Since you have the configuration already built in the GUI, you could find the commands used to configure your SSIDs in the output of "show run", and apply those to the CLI of an AP directly. However, CLI configuration is not supported, so technical support wouldn't be able to assist you with setting this up or troubleshooting APs configured via the CLI, just so you are aware ahead of time.