https://community.extremenetworks.com/t5/aerohive-migrated-content/hello-i-was-not-able-to-find-information-about-how-to-configure/m-p/61403#M997 <P>We want to connect our AP250 devices to our switchs, as we can aggregate the 2 ports on this model, souds like LACP is a good choice.</P><P>So we set 2 ports of the switch in LACP mode ON (as the AP is in active), then we put our management VLAN (where hivemanager is) as access and our wifi (or client) VLANS as trunk.</P><P>After that, we configured the native and allowed VLANs in the&nbsp;device template and affected the client VLANs on the SSIDs.</P><P>But the clients are not able to connect to their VLAN.</P><P>Am I missing something ?</P> Thu, 13 Jun 2019 00:02:41 GMT mathias_livet 2019-06-13T00:02:41Z https://community.extremenetworks.com/t5/aerohive-migrated-content/hello-i-was-not-able-to-find-information-about-how-to-configure/m-p/61403#M997 <P>We want to connect our AP250 devices to our switchs, as we can aggregate the 2 ports on this model, souds like LACP is a good choice.</P><P>So we set 2 ports of the switch in LACP mode ON (as the AP is in active), then we put our management VLAN (where hivemanager is) as access and our wifi (or client) VLANS as trunk.</P><P>After that, we configured the native and allowed VLANs in the&nbsp;device template and affected the client VLANs on the SSIDs.</P><P>But the clients are not able to connect to their VLAN.</P><P>Am I missing something ?</P> Thu, 13 Jun 2019 00:02:41 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/hello-i-was-not-able-to-find-information-about-how-to-configure/m-p/61403#M997 mathias_livet 2019-06-13T00:02:41Z https://community.extremenetworks.com/t5/aerohive-migrated-content/hello-i-was-not-able-to-find-information-about-how-to-configure/m-p/61404#M998 <P>I see a couple of things that may be creating issues for you. First, I don't think AP250s will aggregate via LACP, they use a Kalpana etherchannel. The next step will be getting the VLAN configs between the switch and APs straight. If you can provide the switch vendor, we can probably help with a general config. The switch terminology and configuration may vary depending on the vendor you're using.</P> Thu, 13 Jun 2019 03:54:41 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/hello-i-was-not-able-to-find-information-about-how-to-configure/m-p/61404#M998 bruce_stahlin 2019-06-13T03:54:41Z https://community.extremenetworks.com/t5/aerohive-migrated-content/hello-i-was-not-able-to-find-information-about-how-to-configure/m-p/61405#M999 <P>Thanks for the reply,</P><P>Our APs are connected to Dell N2048P switchs, they use 802.3ad standard to aggregate links (port-channel in CLI).</P> Thu, 13 Jun 2019 15:21:35 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/hello-i-was-not-able-to-find-information-about-how-to-configure/m-p/61405#M999 mathias_livet 2019-06-13T15:21:35Z https://community.extremenetworks.com/t5/aerohive-migrated-content/hello-i-was-not-able-to-find-information-about-how-to-configure/m-p/61406#M1000 <P>Hello,</P><P>Anyone had the same issue ?</P> Mon, 17 Jun 2019 22:38:21 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/hello-i-was-not-able-to-find-information-about-how-to-configure/m-p/61406#M1000 mathias_livet 2019-06-17T22:38:21Z