Purview PV-FC-180 root password reset

PaulR — Thu, 14 Apr 2022 16:01:48 GMT

Does anyone know what the procedure is to reset the root password for Purview PV-FC-180? .
have tried looking online but no luck - is there a backdoor password or something ?

I need to make some changes to config but the password does not work

thanks

Re: Purview PV-FC-180 root password reset

Ryan_Yacobucci — Sat, 16 Apr 2022 21:14:45 GMT

Hello,

There is no backdoor password, whatever was set on install is the only password that exists.

You can try this:

https://extremeportal.force.com/ExtrArticleDetail?an=000079472

It's an older article that I think was created around Ubuntu 12.04 LTS OS.

When it comes to virtual/physical appliances it's usually faster to re-image and re-deploy than try to recover the password.

For ExtremeControl 95% of all configuration is stored and pushed from the XMC server. Just give it host properties like IP/gateway/domain/DNS and then enforce. The 5% being host configuration and DNS proxy (If applicable)

Analytics is similar. As long as you can remember the initial host configuration settings you should be able to re-deploy with the same IP, enforce from XMC and it should be OK.

App telemetry/netflow/mirror N/GRE tunnels are all configured in the network infrastructure, Analytics just needs to listen on the correct interface with the correct IP and report the information back to XMC.

Thanks
-Ryan

topic Re: Purview PV-FC-180 root password reset in Analytics & Visibility

Purview PV-FC-180 root password reset

Re: Purview PV-FC-180 root password reset