topic Re: QnQ on CER in Data Center (MLX & CER/CES)

QnQ on CER

lcarl — Thu, 17 Sep 2020 08:44:18 GMT

Try to enter he command tag-type and seems like not working or not on the older code. Wanted to configure QnQ on CER

Re: QnQ on CER

tmasuda — Thu, 17 Sep 2020 09:20:59 GMT

which version?

Re: QnQ on CER

lcarl — Thu, 17 Sep 2020 09:41:12 GMT

As mentioned could be older version. I now have the version and it is 5.6.f I did tell him to upgrade…. Was this supported in 5.6.f?

Re: QnQ on CER

Deep_Bakul_Bhoj — Thu, 17 Sep 2020 18:43:39 GMT

I am able to configure “tag-type” on 5.6d code. The configuration is under the global configuration mode. Please let us know what error are they seeing.

Re: QnQ on CER

lcarl — Fri, 18 Sep 2020 07:08:05 GMT

Looks like CER unlike MLX from what read does not support tag-type command.. looking at Port-based Service Interface Super Aggregated
VLANs (SAV) on the CER…. Issue is if change tag2 to 9100 and apply to the network port it will impact other traffic

Re: QnQ on CER

lcarl — Sat, 19 Sep 2020 17:09:41 GMT

With the following what is the tag type 8100, /9100…...or on port 2/3

interface ethernet 2/3

port-type provider-network