How to upgrade firmware for NetIron CER 2024F-4X router v5,8 -- > v6.2

uberuberuber33 — Fri, 25 Sep 2020 10:44:20 GMT

Hello guys,

Hope you are all well.

Could some experts share the documentation for upgrading firmware on NetIron CER 2024F-4X router from v5,8.0-- > v6.2.0?

Many thanks,

Regards,

Ray

Re: How to upgrade firmware for NetIron CER 2024F-4X router v5,8 -- > v6.2

joergkost — Fri, 25 Sep 2020 15:20:56 GMT

Do you mean the upgrade guide?

https://documentation.extremenetworks.com/netiron/SW/62x/netiron-6200-upgradeguide.pdf?_ga=2.108592001.2633511.1600943811-2105409807.1575108507

Upgrading a CES/CER has become almost a no brainer with the manifest method, placing the files on a e.g. TFTP server:

telnet@NetIron CES 2048CX#copy tftp system 192.168.1.2 manifest 062b/CES-CER06200b_Manifest.txt
.TFTP: Download to flash done.
.TFTP: Download to flash done.
Verified OK

1) Download MP monitor image 062b/Boot/ceb06000.bin from tftp 192.168.1.2
.Removing monitor from flash. TFTP: Download to flash done.

2) Download MP application image 062b/Application/ce06200b.bin from tftp 192.168.1.2 to primary:
Removing primary from flash.

3) Download FPGA PBIF image 062b/FPGA/pbifmetro_06200b.bin from tftp 192.168.1.2:
FTP: Download to flash done.

Now copy new PBIF image from FLASH to EPROM. Please wait ...
The current PBIF image is intact until the system is reloaded.
Save the new PBIF to flash Done
Removing the backup pbif image

System Upgrade Done.
Upgrade Summary
  Source: tftp 192.168.1.2 Directory 062b
1) Installed 062b/Boot/ceb06000.bin to MP Monitor
2) Installed 062b/Application/ce06200b.bin to MP Primary
3) Installed 062b/FPGA/pbifmetro_06200b.bin to LP FPGA PBIF

Checking for coherence...
Done.

topic How to upgrade firmware for NetIron CER 2024F-4X router v5,8 -- > v6.2 in Data Center (MLX & CER/CES)

How to upgrade firmware for NetIron CER 2024F-4X router v5,8 -- > v6.2

Re: How to upgrade firmware for NetIron CER 2024F-4X router v5,8 -- > v6.2