topic Re: Ironware secondary image was not upgraded on the Line cards on MLX-4 in Data Center (MLX & CER/CES)

Ironware secondary image was not upgraded on the Line cards on MLX-4

thaizoun — Tue, 20 Oct 2020 22:45:00 GMT

Hello,

I was able to successfully upgrade an MLX-4 to version 6.2.00d.Yet , when i issue the show flash command , the S1 through S4 show that the primary Ironware was upgraded to 6.2.00d , however the secondary image did not get upgraded to 6.2.00d

o IronWare Image (Primary)
    Version 6.2.0dT177, Size 9571326 bytes, Check Sum fc39
    Compiled on Jun 6 2019 at 01:50:00 labeled as xmlp06200d
o IronWare Image (Secondary)
    Version 5.9.0T177, Size 9485930 bytes, Check Sum 880f
    Compiled on Feb 24 2016 at 07:27:20 labeled as xmlp05900b1

this is the command i used to perform the upgrade

copy tftp system all-images x.x.x.x manifest MLX06200d_Manifest.txt

Please advise

Re: Ironware secondary image was not upgraded on the Line cards on MLX-4

tmasuda — Tue, 20 Oct 2020 22:55:47 GMT

copy tftp flash x.x.x.x xmr06200d.bin secondary

copy tftp lp x.x.x.x xmlp06200d.bin secondary all

Re: Ironware secondary image was not upgraded on the Line cards on MLX-4

thaizoun — Tue, 20 Oct 2020 22:58:39 GMT

Thank you kindly for your prompt response to my inquiry.

I will go head and perform the action you recommended

Thank you again