topic RE: ipsec on netiron CER 2024* in Data Center (MLX & CER/CES)

ipsec on netiron CER 2024*

George_Khan — Tue, 27 Feb 2018 16:13:00 GMT

Hi there!

I have 4 routers: 2x NetIron CER 2024C , NetIron CER 2024C-4X , NetIron CER 2048F

Could you please tell me, they support IPSEC? It is possible to configure them with IPSEC?

RE: ipsec on netiron CER 2024*

Michael_Andreas — Tue, 27 Feb 2018 16:40:00 GMT

RE: ipsec on netiron CER 2024*

Michael_Andreas — Tue, 27 Feb 2018 16:40:00 GMT

this uis from the Support Matrx 6.200.
Hope that helps .

RE: ipsec on netiron CER 2024*

George_Khan — Tue, 27 Feb 2018 19:09:00 GMT

Hi, Michael !
Thank u 4 ur reply! So, if i have on my CER 2024* firmware ver V5.8.0a , for me ipsec is unavailable - this correct?

RE: ipsec on netiron CER 2024*

Michael_Andreas — Tue, 27 Feb 2018 19:45:00 GMT

correct. ( from the Matrix )
Encryption and decryption of IP packets and the tunnel setup using IKEv2 can be done only on the BR-MLX-10GX4-M IPSEC line card.
Have a look please into the "Security Configuration Guide" page 203 ff.. for the features you looking for .

RE: ipsec on netiron CER 2024*

George_Khan — Tue, 27 Feb 2018 21:04:00 GMT

But i cant see this features _only_ for mlx* series on http://www.brocade.com/content/dam/common/documents/content-types/configuration-guide/netiron-05900-... here is just examples with mlx ...
There is no modules with ipsec (ikev2) for CER 2000 (2024) series?

RE: ipsec on netiron CER 2024*

Michael_Andreas — Tue, 27 Feb 2018 21:28:00 GMT

yes there are no modules with ipsec (ikev2) for CER 2000 (2024) series

RE: ipsec on netiron CER 2024*

George_Khan — Wed, 28 Feb 2018 16:36:00 GMT

Ok, Michael , thank you so much! 