How to configure syslog server on a MLXe switch?

Cristian_Gonzal — Fri, 13 Sep 2019 01:39:53 GMT

Re: How to configure syslog server on a MLXe switch?

joergkost — Fri, 13 Sep 2019 01:46:42 GMT

code:

conf t
logging host 192.168.4.2
wr mem

Re: How to configure syslog server on a MLXe switch?

Cristian_Gonzal — Fri, 13 Sep 2019 01:51:01 GMT

Hi,

Is everything to be configured? or I have to enable the different events that I want to observe in the syslog:

logging enable

Enables system log messages and traps for the specified protocol or event.

Syntax logging enable {bfd | cfm | config-changed | fan-speed-change | fan-state-change | ikev2 | ikev2-extended | ipsec | linkstate-change | mac-mismatch-detection | mgmt-mod-redun-state-change | module-hotswap | mpls | mvrp-vlan | ntp | ospf | pki-extended | rstp | snmp-auth-failure | temp-error | user-login | vrrp-config-validate | vrrp-if-state-change} no logging enable {bfd | cfm | config-changed | fan-speed-change | fan-state-change | ikev2 | ikev2-extended | ipsec | linkstate-change | mac-mismatch-detection | mgmt-mod-redun-state-change | module-hotswap | mpls | mvrp-vlan | ntp | ospf | pki-extended | rstp | snmp-auth-failure | temp-error | user-login | vrrp-config-validate | vrrp-if-state-change}

Command Default

Log messages for specific protocols or events are enabled.

topic Re: How to configure syslog server on a MLXe switch? in Data Center (MLX & CER/CES)

How to configure syslog server on a MLXe switch?

Re: How to configure syslog server on a MLXe switch?

Re: How to configure syslog server on a MLXe switch?