https://community.extremenetworks.com/t5/data-center-slx/wake-on-lan-on-brocade-vcs/m-p/19993#M28 Hi, I have server SCCM connected to VLAN on Brocade VCS. I need send WOL magic packets to others subnetworks outside VCS. How to I can do it safety on VCS? <BR /> I've read that may use command: ip directed-broadcast, haw use this command on VCS?<BR /> Regards<BR /> Marek Fri, 19 Oct 2018 15:33:00 GMT Marek_Milik 2018-10-19T15:33:00Z https://community.extremenetworks.com/t5/data-center-slx/wake-on-lan-on-brocade-vcs/m-p/19993#M28 Hi, I have server SCCM connected to VLAN on Brocade VCS. I need send WOL magic packets to others subnetworks outside VCS. How to I can do it safety on VCS? <BR /> I've read that may use command: ip directed-broadcast, haw use this command on VCS?<BR /> Regards<BR /> Marek Fri, 19 Oct 2018 15:33:00 GMT https://community.extremenetworks.com/t5/data-center-slx/wake-on-lan-on-brocade-vcs/m-p/19993#M28 Marek_Milik 2018-10-19T15:33:00Z https://community.extremenetworks.com/t5/data-center-slx/wake-on-lan-on-brocade-vcs/m-p/19994#M29 The VDX uses Ethernet Primitives in order to discover connections between each switch in a VCS fabric. The primitive sequences used by VDX were interfering with the device waking up.<BR /> The primitives can be turned off in the interface configuration as shown below - allowing the Wake on LAN to work: !<BR /> interface TenGigabitEthernet 1/0/1<BR /> <B>no fabric isl enable<BR /> no fabric trunk enable<BR /> fabric neighbor-discovery disable</B><BR /> no shutdown<BR /> Please refer to article below<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Wake-on-LAN-not-working-on-the-VDX" target="_blank" rel="nofollow noreferrer noopener">https://gtacknowledge.extremenetworks.com/articles/Solution/Wake-on-LAN-not-working-on-the-VDX</A><BR /> <BR /> Thu, 25 Oct 2018 18:57:00 GMT https://community.extremenetworks.com/t5/data-center-slx/wake-on-lan-on-brocade-vcs/m-p/19994#M29 Chaminda_Nanaya 2018-10-25T18:57:00Z