topic Re: I need to disable backup routing in Data Center (SLX)

I need to disable backup routing

Neeraj_Singh — Tue, 13 Jun 2023 08:04:06 GMT

while trying to disable backup routing its not working , refer below log

efa fabric setting update --name fabric1 --backup-routing-enable no
Error : fabric1: fabric is already active and cannot be updated

Re: I need to disable backup routing

Michael_Morey — Tue, 13 Jun 2023 13:18:16 GMT

Neeraj,

The error is indicating that your fabric is already active, meaning that you have already pushed the configuration to the IP fabric via the "efa fabric configure --name [fabric_name]" command. You will need to delete and recreate your fabric.

These settings are the only ones that can be updated after adding devices and configuring the fabric:

--p2p-link-range --loopback-ip-range --bfd-enable --bfd-tx --bfd-rx --bfd-multiplier --mctlink-ip-range --single-rackdeployment --md5-password-enable --md5-password --bgp-dynamic-peerlisten-limit

https://documentation.extremenetworks.com/efa/efa_3.0.0/admin/downloads/efa-3.0.0-adminguide.pdf

Please review page 88 of the admin guide.

Thanks,

Re: I need to disable backup routing

Neeraj_Singh — Thu, 15 Jun 2023 12:25:42 GMT

Hello Michael,

DC is live now, if i delete and re-create the fabric i will have impact . is there any way via update or operation command if it can be modify that backup-ipv4 -range .?

ex- efa fabric setting update --name FABRIC --backup-routing-ipv4-range <new ip>