Routing question with VDX. I don't want this route.

Al_Mat — Sat, 10 Mar 2018 02:40:00 GMT

Hello!
I have a question about my Vdx-6740 fabric.
I have a laptop who is pluged into a router (R1).
R1 is pluged in VDX54.
VDX54 is pluged in VDX53 (Fabric ISL Trunk)
And the institution (ECO) is pluged in VDX53.

On VDX54, I have:
Vlan 912: 10.1.54.11
Vlan 195: 172.16.32.2
Vlan 198: 172.16.0.2

On VDX53, I have:
Vlan 154: 10.54.8.121
Vlan 195: 172.16.32.3
Vlan 198: 172.16.0.3
Vlan 921: 10.1.18.10

If I have a look on routing table on VDX54:

I do not want packets to go through roads 172.
How do I do that?

In a fabric, do I have to set the virtual interface for each vlan on each VDX or it's works like a stack?

I uploaded a screen shot of the routing table and a little plan for connection.

Thanks!

BYe!

RE: Routing question with VDX. I don't want this route.

Yulia_Abitbul — Tue, 31 Jul 2018 01:26:00 GMT

L3 configuration should be done on each VDX separately

topic RE: Routing question with VDX. I don't want this route. in Data Center (VDX)

Routing question with VDX. I don't want this route.

RE: Routing question with VDX. I don't want this route.