command for showing uptime VDX 6470 switch

uberuberuber33 — Sun, 13 Sep 2020 16:53:44 GMT

Hello all,

Does anyone know what is the command for showing the device uptime for VDX 6470 switch? The firmware version I am currently using is v7.2.x

For Cisco equipment, the command to show the uptime is show version. So what is the equivalent command for VDX 6740 switch?

Many thanks

Best regards,

Ray

Re: command for showing uptime VDX 6470 switch

joergkost — Sun, 13 Sep 2020 17:12:47 GMT

show chassis

show chassis rbridge-id $X

Re: command for showing uptime VDX 6470 switch

Ivan_Chan — Mon, 14 Sep 2020 01:05:45 GMT

The command to see the Uptime for this switch is in the output of Show System.

VDX6740# sh system
Stack MAC : 50:eb:1a:2a:0f:d8

-- UNIT 0 --
Unit Name                     : VDX6740
Switch Status                 : Online
Hardware Rev                  : 131.7
TengigabitEthernet Port(s)    : 48
FortyGigabitEthernet Port(s) : 4
Up Time                       : up 10 days 23:09                        << =============== Up Time
Current Time                  : 16:45:25 GMT
NOS Version                   : 7.2.0d
Jumbo Capable                 : yes
Burned In MAC                 : SW/0 [50:EB:1A:2A:0F:D9], SW/1 [50:EB:1A:2A:0F:D8]
Management IP                 : 10.26.136.99
Management Port Status        : UP

Where in the output of show chassis, Time Awake is the approximation of the uptime for the switch.

VDX6740# sh chassis

…

CHASSIS/WWN Unit: 1
Power Consume Factor:   0
Factory Part Num:       40-1000927-06
Factory Serial Num:     CPL2529K16B
Manufacture:            Day: 6 Month: 7 Year: 14
Update:                 Day: 12 Month: 9 Year: 2020
Time Alive:             1441 days
Time Awake:             10 days                         <<<«   ================ Awake in days

Airflow direction : Port side EXHAUST

Ivan Chan

Principal Technical Support Engineer / Extreme Networks

San Jose, California, USA

ichan@extremenetworks.com

www.ExtremeNetworks.com

Office / +1-408-579-2990

Hours: M-F 7am-4pm PST

~*~

ExtremeNetworks.com

Advance With Us™

This e-mail and any attachments to it may contain confidential and proprietary material and

is solely for the use of the intended recipient. Any review, use, disclosure, distribution or

copying of this transmittal is prohibited except by or on behalf of the intended recipient. If you

have received this transmittal in error, please notify the sender and destroy this e-mail and

any attachments and all copies, whether electronic or printed.

DID YOU KNOW

Extreme Connect – Extreme’s largest User’s Conference is being held on Sept 16th and 17th and is complementary to all our guests. For more information or to register, please click on this link https://extremeconnect.co/virtual

-----

Re: command for showing uptime VDX 6470 switch

uberuberuber33 — Mon, 14 Sep 2020 10:13:02 GMT

Hello Ivan Chan,

Thanks a lot for your help! Much appreciated that!

Regards,

Ray

topic Re: command for showing uptime VDX 6470 switch in Data Center (VDX)

command for showing uptime VDX 6470 switch

Re: command for showing uptime VDX 6470 switch

Re: command for showing uptime VDX 6470 switch

Re: command for showing uptime VDX 6470 switch