topic VDX6740 Channel-Group Interface Priority in Data Center (VDX)

VDX6740 Channel-Group Interface Priority

Russ — Tue, 29 Sep 2020 06:37:17 GMT

Hi,

I’m setting up a channel-group with a couple of member interfaces and need to set some priorities on the interfaces so one interface is preferred over the other. I’ve been looking through the command reference documentation but cannot find the relevant command.

If someone could pass on or pint me in the right direction? Thanks.

Re: VDX6740 Channel-Group Interface Priority

joergkost — Tue, 29 Sep 2020 13:59:59 GMT

Hi,

you can add priorities under the interface stanza:

core-21(config)# interface TenGigabitEthernet 21/0/3
core-21(conf-if-te-21/0/3)# lacp port-priority ?
Possible completions:
  <1-65535>   LACP port priority <1-65535> (default = 32768)

core-21# show running-config interface TenGigabitEthernet 21/0/3
interface TenGigabitEthernet 21/0/3
 fabric isl enable
 fabric trunk enable
 channel-group 65 mode active type standard
 lacp port-priority 4000
 lacp timeout long
 no shutdown

Regards.

Re: VDX6740 Channel-Group Interface Priority

Russ — Tue, 29 Sep 2020 14:03:46 GMT

awesome thanks for you reply!