topic VDX6740 upgrade from 6.0.2 to 7.4.1 in Data Center (VDX)

VDX6740 upgrade from 6.0.2 to 7.4.1

marcodalli — Thu, 01 Apr 2021 22:15:55 GMT

Hi everyone,

I need to upgrade two VDX6740 switches that form a VCS from 6.0.2b to 7.4.1b.

Since we can reboot the switches, I don’t mind doing a reboot, as long as the configuration is retained.

According to this article (https://extremeportal.force.com/ExtrArticleDetail?an=000076780) it is possible to jump from 6.0.2h to 7.4.1a directly without losing configuration, although release notes from 7.4.1 suggest coldboot is possible only from 7.x. Which one is correct?

Is it possible to upgrade from 6.0.2h to 7.4.1a (or better 7.4.1b) without losing configuration?

Thanks!

Marco

Re: VDX6740 upgrade from 6.0.2 to 7.4.1

Mick_Day — Fri, 02 Apr 2021 15:00:49 GMT

Hi Marco,

Upgrade of NOS whilst retaining configuration is only possible one step at a time. i.e. NOS 6.0.2 to NOS 7.0.2 or NOS 7.1.0x to NOS 7.2.0x

In your case to upgrade from NOS 6.0.2h to NOS 7.4.1x would require 6 upgrade steps to retain configuration

NOS6.0.2h → NOS7.0.2x → NOS7.1.0x → NOS7.2.0x → NOS7.3.0x → NOS7.4.0x → NOS7.4.1x

There is multi-version upgrade option which is described in the article you refer to, but in your case with a two switch fabric this would not gain you much time, so a standard step by step upgrade would be best for you.

There are no direct upgrade paths which will retain configuration without using the intermediate versions. The direct approach would only be possible by defaulting the configuration.

Re: VDX6740 upgrade from 6.0.2 to 7.4.1

marcodalli — Fri, 02 Apr 2021 17:32:40 GMT

Thank you Mick,

I will then do a direct upgrade and restore config afterwards.

Marco