VDX6740( 7.3.0aa) - Policy-Based Routing (PBR) -

pawarpavan — Fri, 21 Jul 2023 09:15:54 GMT

Hello Experts,

I'm exploring the PBR route-map set and match options to use them in production and I see switch has a lot of flexibility in terms of match and set :

extreme01(config-rbridge-id-1)# route-map DC_PROD permit 12

extreme01(config-route-map-DC_PROD/permit/12)# match ?

Possible completions:

as-path IP AS Path Access Lists.

community Community Access List Name.

extcommunity Match BGP/VPN extended community list

interface Interface name, maximum 3 interfaces supported

ip Internet Protocol (IP).

ipv6 Internet Protocol (IPv6).

metric Route metric

protocol Match route on protocol type and sub-type.

route-type Route type.

tag Route tag.

vrf VRF name

extreme01(config-route-map-DC_PROD/permit/12)# set ?

Possible completions:

as-path Prepend string for a BGP AS-path attribute

automatic-tag Automatically compute TAG value

comm-list BGP community list for deletion

community BGP community attribute.

dampening BGP route flap damping

distance Set Admin Distance for matching OSPF routes

extcommunity BGP extended community attribute

ip Internet Protocol (IP).

ipv6 Internet Protocol (IPv6).

local-preference BGP local preference path attribute

metric Metric value for destination routing protocol

metric-type Type of metric for destination routing protocol

origin BGP origin code

tag Route tag

weight BGP weight for routing table

But then I referred Extreme Network OS Security Config doc which only talks about the below options

So wanted to know what options we support.

-Pavan Pawar

Re: VDX6740( 7.3.0aa) - Policy-Based Routing (PBR) -

Michael_Morey — Fri, 21 Jul 2023 13:14:33 GMT

All of those options should be supported.

I would check the Command Reference guide for a little more information on each.

Thanks,