New Documentation Published December 18th-31st!

SamPirok — Tue, 03 Jan 2023 14:59:40 GMT

Our support teams published 52 new articles over the last couple of weeks! Check out the new titles below!

All

SA-2022-038 - OpenSSL Custom Ciphers (CVE-2022-3358)

Campus Fabric Articles

What is the supported upgrade path for VOSS switches upgrading from 8.2.8.0 to 8.8.1.0?

Archived VSP configs in XMC/XIQ-SE are unreadable when accessed via "View Configuration File"

Can we get a list with a breakdown of what types of metals and other materials the switches are made of, to comply with REACH?

VSP7024: "Error % Invalid input detected at '^' marker" When Attempting To Configure SNMPv3

Error When Configuring SPB On RMA'ed Switch

VSP 4900: Some SFPs don't work on VIM module after SW upgrade

What is the behavior on a vIST L2VSN for the VSP 8600 Platform?

Data Center Articles

Does SLX have the OSPFv2 network statement like Cisco?

Can we change speed settings on a breakout port of SLX9150?

In 18r.1.00j and later, unless flow control is enabled, 1518 byte known unicast frames pushed through at 95% line rate will result in packet loss.

Does TACAS server support MFA (multi factor authentication)

What is the command to see Rx/Tx optical levels?

Grub password is asked during every reboot by SLX

20.4.1c| ARP issue after lacp flap :After flap of the lag port , arp issue is seen on end device (server) connected to ccep port.

How to safely remove a port from a lag

SLX hangs in maintenance mode

issue for copy file from vdx to external ftp server

SLX VE IP address learned on client port instead of MCT ICL port resulting in packet loss

EXOS Articles

What does the log "MM-A: Skipping set_card_state(2, POWERON) as in POWERON instead of POWEREDOFF" mean?

What is the EXOS OID for the last change config time?

Slow "show port forwarding-error-correction" output for not-present slot/ports in a stack

Deny-cpu policy entry not blocking packets from being passed to CPU

Can a configuration file be moved from one platform to another

X695 slow "show port transceiver information" output for port 63

How is the DHCP secure ARP work?

SSH does not work, key shows as invalid, 'disable ssh' hangs CLI

IdentiFi Articles

AP-3865-E APs disconnect from Controller

V2110 is not responding

Legacy Articles

How to block iOS devices from accessing a given Wi-Fi network, SSID

Common Issues: Control didn't select correct rule in rules engine

XIQ/XIQ-SE Exceeded licensed device limit while appropriate licenses exist

Administrative RADIUS requests intermittently rejected

XIQ-Controller AP3935 radios may be off after upgrade or migration to 10.03.02

SD-WAN Articles

Which Salsa and 5view services should be stopped before a server update?

Traffic goes from NAP1 to NAP2 on the dashboard

Universal Articles

Is XMC v8.5.7.28 compatible with VOSS v8.9.0.0?

WiNG Articles

AirDefense Enterprise - Unable to move devices in ADSP from a folder back to a unplaced device folder

Captive portal is not working with newly configured AP410i access points on a VX9000

What is the default UI log-out time in Extreme AirDefense Enterprise

Wing Wireless clients radio information is not visible from the Controller

XIQ Articles

What is the maximum lenght of IQE device hostname?

Online XIQ Not Accessible - Suspended VHM!

Where to get XIQ Client Monitor information

ICMP ping traffic from APs to clients when INXP is used

[XIQ]CWP error message was incorrect.

AP keeps missing SSID issue; SSID not broadcasting Intermittently;

Devices on NL-GCP Lose Connection to CloudIQ

Clients receive certificate error when connecting to XIQ Access Point and being redirected to NAC CWP

[XIQ] Interface settings is not correctly displayed in XIQ foreign language mode

XMC Articles

Installation of third party tools on nac or apt-get -f install may remove critical packages

extremeControl cannot configure EXOS switch with shared secret > 32 characters

topic New Documentation Published December 18th-31st! in Documentation

New Documentation Published December 18th-31st!