https://community.extremenetworks.com/t5/end-of-service-products/ridgeline-topology-is-not-updating/m-p/22204#M152 Doing this from memory as 3.1 is very old... If I recall you right mouse the map and there is an update links for switch or complete map.. this will refresh the links and should re-draw the maps. You may also have to re-sync the two switches to get the link to show back up...That version of Ridgeline was bad about not re-syncing after changes Thu, 15 Dec 2016 03:33:00 GMT EtherMAN 2016-12-15T03:33:00Z https://community.extremenetworks.com/t5/end-of-service-products/ridgeline-topology-is-not-updating/m-p/22203#M151 Sir,<BR /> We are using Ridgeline 3.1 SP3 NMS for our Network Management. Please check the following image for existing topology.<BR /> <BR /> <P class="fancybox-image"><span class="lia-inline-image-display-wrapper" image-alt="d800d9e63ba545448cf15cfbab3ef186_RackMultipart20161214-53621-147mvva-Original-Topology_inline.jpg"><img src="https://community.extremenetworks.com/t5/image/serverpage/image-id/2810i40A1AEA12AC76389/image-size/large?v=v2&amp;px=999" role="button" title="d800d9e63ba545448cf15cfbab3ef186_RackMultipart20161214-53621-147mvva-Original-Topology_inline.jpg" alt="d800d9e63ba545448cf15cfbab3ef186_RackMultipart20161214-53621-147mvva-Original-Topology_inline.jpg" /></span></P><BR /> <BR /> Few days back, one of the EAPS link fiber was disconnected. But, Now We have established in the connection after splicing the fiber cable. So, after fiber splicing the EAPS link between activated in the switch but it is not updated in the topology map. Please check the below image.<BR /> <P class="fancybox-image"><span class="lia-inline-image-display-wrapper" image-alt="d800d9e63ba545448cf15cfbab3ef186_RackMultipart20161214-7303-47dj2x-latest_inline.jpg"><img src="https://community.extremenetworks.com/t5/image/serverpage/image-id/2828iC5687FE7BE88A08A/image-size/large?v=v2&amp;px=999" role="button" title="d800d9e63ba545448cf15cfbab3ef186_RackMultipart20161214-7303-47dj2x-latest_inline.jpg" alt="d800d9e63ba545448cf15cfbab3ef186_RackMultipart20161214-7303-47dj2x-latest_inline.jpg" /></span></P><BR /> <BR /> Let us know, is there any steps to update the topology map. If any steps are available please share. Thanks in advance. <BR /> Wed, 14 Dec 2016 20:27:00 GMT https://community.extremenetworks.com/t5/end-of-service-products/ridgeline-topology-is-not-updating/m-p/22203#M151 Thavamani_Shanm 2016-12-14T20:27:00Z https://community.extremenetworks.com/t5/end-of-service-products/ridgeline-topology-is-not-updating/m-p/22204#M152 Doing this from memory as 3.1 is very old... If I recall you right mouse the map and there is an update links for switch or complete map.. this will refresh the links and should re-draw the maps. You may also have to re-sync the two switches to get the link to show back up...That version of Ridgeline was bad about not re-syncing after changes Thu, 15 Dec 2016 03:33:00 GMT https://community.extremenetworks.com/t5/end-of-service-products/ridgeline-topology-is-not-updating/m-p/22204#M152 EtherMAN 2016-12-15T03:33:00Z