https://community.extremenetworks.com/t5/end-of-service-products/snmpv3-and-ridgeline-3-1-error/m-p/21526#M18 Create Date: Jul 30 2013 2:55PM<BR /> <BR /> After getting SNMPv3 access working (or at least what I thought was working) with Ridgeline. I attempt to sync the device within ridgeline and everything works fine except this lone failure line:<UL> Failed to add system as a snmpv3 target </UL>Any thoughts on what is causing this? <BR /> <BR /> These are the commands I used to get snmpv3 running on the switch in question.<BR /> <BR /> configure snmp delete community readonly public<BR /> configure snmp delete community readwrite private<BR /> disable snmp access snmp-v1v2c<BR /> disable snmpv3 default-group<BR /> disable snmpv3 default-user<BR /> configure snmpv3 add user <MYUSER> authentication sha <MYPASSWORD> privacy des <MYPASSWORD><BR /> configure snmpv3 add group <MYGROUP> user <MYUSER> sec-model usm<BR /> configure snmpv3 add access <MYGROUP> sec-model usm sec-level priv<BR /> (from Ryan_Harp)</MYGROUP></MYUSER></MYGROUP></MYPASSWORD></MYPASSWORD></MYUSER> Wed, 08 Jan 2014 06:06:00 GMT EtherNation_Use 2014-01-08T06:06:00Z https://community.extremenetworks.com/t5/end-of-service-products/snmpv3-and-ridgeline-3-1-error/m-p/21526#M18 Create Date: Jul 30 2013 2:55PM<BR /> <BR /> After getting SNMPv3 access working (or at least what I thought was working) with Ridgeline. I attempt to sync the device within ridgeline and everything works fine except this lone failure line:<UL> Failed to add system as a snmpv3 target </UL>Any thoughts on what is causing this? <BR /> <BR /> These are the commands I used to get snmpv3 running on the switch in question.<BR /> <BR /> configure snmp delete community readonly public<BR /> configure snmp delete community readwrite private<BR /> disable snmp access snmp-v1v2c<BR /> disable snmpv3 default-group<BR /> disable snmpv3 default-user<BR /> configure snmpv3 add user <MYUSER> authentication sha <MYPASSWORD> privacy des <MYPASSWORD><BR /> configure snmpv3 add group <MYGROUP> user <MYUSER> sec-model usm<BR /> configure snmpv3 add access <MYGROUP> sec-model usm sec-level priv<BR /> (from Ryan_Harp)</MYGROUP></MYUSER></MYGROUP></MYPASSWORD></MYPASSWORD></MYUSER> Wed, 08 Jan 2014 06:06:00 GMT https://community.extremenetworks.com/t5/end-of-service-products/snmpv3-and-ridgeline-3-1-error/m-p/21526#M18 EtherNation_Use 2014-01-08T06:06:00Z https://community.extremenetworks.com/t5/end-of-service-products/snmpv3-and-ridgeline-3-1-error/m-p/21527#M19 Create Date: Sep 19 2013 1:33PM<BR /> <BR /> <I>rmharp wrote:</I><BR /> After getting SNMPv3 access working (or at least what I thought was working) with Ridgeline. I attempt to sync the device within ridgeline and everything works fine except this lone failure line:<UL> Failed to add system as a snmpv3 target </UL>Any thoughts on what is causing this? <BR /> <BR /> These are the commands I used to get snmpv3 running on the switch in question.<BR /> <BR /> configure snmp delete community readonly public<BR /> configure snmp delete community readwrite private<BR /> disable snmp access snmp-v1v2c<BR /> disable snmpv3 default-group<BR /> disable snmpv3 default-user<BR /> configure snmpv3 add user <MYUSER> authentication sha <MYPASSWORD> privacy des <MYPASSWORD><BR /> configure snmpv3 add group <MYGROUP> user <MYUSER> sec-model usm<BR /> configure snmpv3 add access <MYGROUP> sec-model usm sec-level priv<BR /> </MYGROUP></MYUSER></MYGROUP></MYPASSWORD></MYPASSWORD></MYUSER><A href="http://ethernation.net/LinkClick.aspx?link=http%3a%2f%2f%2fDefault.aspx%3ftabid%3d84%26ctl%3dPostEdit%26forumid%3d9%26postid%3d3123%26action%3dquote%26mid%3d410&amp;#38;tabid=84&amp;#38;portalid=1&amp;#38;mid=410" target="_blank" rel="nofollow noreferrer noopener"> </A> http://ethernation.net/Default.aspx?tabid=84&amp;forumid=9&amp;threadid=2072&amp;scope=posts<BR /> <BR /> (from Doug_Jaquays) Wed, 08 Jan 2014 06:06:00 GMT https://community.extremenetworks.com/t5/end-of-service-products/snmpv3-and-ridgeline-3-1-error/m-p/21527#M19 EtherNation_Use 2014-01-08T06:06:00Z