https://community.extremenetworks.com/t5/end-of-service-products/configuring-snmpv3/m-p/22459#M196 Create Date: May 29 2013 1:33PM<BR /> <BR /> YES, it is possible. I use Ridgeline and scripts for configure the switches (x450, x460, x480) with snmpv3:<BR /> <BR /> 1. connect switch with snmpv1/2<BR /> <BR /> 2. on switch create and configure user with cli or script (adjust v3_user, auth_pwd, priv_pwd)<BR /> ------------------<BR /> configure snmpv3 add user v3_user authentication md5 auth_pwd privacy priv_pwd<BR /> configure snmpv3 add group admin user v3_user sec-model usm <BR /> --------------------<BR /> <BR /> 3. change your local snmp settings:<BR /> - version<BR /> - username (v3_user)<BR /> - privacy protocol (DES)<BR /> - privaciy password (priv_pwd)<BR /> - authentication protocol (MD5)<BR /> - authentication password (auth_pwd)<BR /> <BR /> 4. Try it, I hope it works!<BR /> <BR /> Regards,<BR /> Elwood<BR /> (from Peter_Eschholz) Wed, 08 Jan 2014 06:06:00 GMT EtherNation_Use 2014-01-08T06:06:00Z https://community.extremenetworks.com/t5/end-of-service-products/configuring-snmpv3/m-p/22458#M195 Create Date: May 24 2013 1:58AM<BR /> <BR /> I cannot manage switch via snmpv3 - keep giving authentication errors and will not adddoes anyone have a config commands to configure x460 for snmpv3. Is it possible to add the switch via snmpv1 then send commands to configure snmpv3 thru scripts?Thanks (from David_Kordyban) Wed, 08 Jan 2014 06:06:00 GMT https://community.extremenetworks.com/t5/end-of-service-products/configuring-snmpv3/m-p/22458#M195 EtherNation_Use 2014-01-08T06:06:00Z https://community.extremenetworks.com/t5/end-of-service-products/configuring-snmpv3/m-p/22459#M196 Create Date: May 29 2013 1:33PM<BR /> <BR /> YES, it is possible. I use Ridgeline and scripts for configure the switches (x450, x460, x480) with snmpv3:<BR /> <BR /> 1. connect switch with snmpv1/2<BR /> <BR /> 2. on switch create and configure user with cli or script (adjust v3_user, auth_pwd, priv_pwd)<BR /> ------------------<BR /> configure snmpv3 add user v3_user authentication md5 auth_pwd privacy priv_pwd<BR /> configure snmpv3 add group admin user v3_user sec-model usm <BR /> --------------------<BR /> <BR /> 3. change your local snmp settings:<BR /> - version<BR /> - username (v3_user)<BR /> - privacy protocol (DES)<BR /> - privaciy password (priv_pwd)<BR /> - authentication protocol (MD5)<BR /> - authentication password (auth_pwd)<BR /> <BR /> 4. Try it, I hope it works!<BR /> <BR /> Regards,<BR /> Elwood<BR /> (from Peter_Eschholz) Wed, 08 Jan 2014 06:06:00 GMT https://community.extremenetworks.com/t5/end-of-service-products/configuring-snmpv3/m-p/22459#M196 EtherNation_Use 2014-01-08T06:06:00Z