topic RE: what is the latest version IOS for Summit48si switches ? in End of Service Products

what is the latest version IOS for Summit48si switches ?

Neeraj_Singh — Wed, 29 Jul 2015 22:16:00 GMT

sh ports no-refresh commands not working in this..my current version is : 7.8.4.1

RE: what is the latest version IOS for Summit48si switches ?

Ty_Izzet — Wed, 29 Jul 2015 22:21:00 GMT

Neeraj, the latest version for the Extremeware series is v784b1-patch1-4. The v784b1-patch1-4.Bxtr or v784b1-patch1-4.SBxtr files are required for the Summit 48Si.

RE: what is the latest version IOS for Summit48si switches ?

BrandonC — Wed, 29 Jul 2015 22:21:00 GMT

Hi Neeraj,

7.8.4.1 is the latest version of ExtremeWare. There is a patch release for that, which is patch1-4.

This may be a hardware failure, however. Unfortunately, the Summit 48si is past its end of support date, so it would not be possible to get a hardware replacement for this switch.

-Brandon

RE: what is the latest version IOS for Summit48si switches ?

Neeraj_Singh — Wed, 29 Jul 2015 22:21:00 GMT

if we upgrade with patches then it will work..?

RE: what is the latest version IOS for Summit48si switches ?

Ty_Izzet — Wed, 29 Jul 2015 22:21:00 GMT

Neeraj, the command syntax is as follows. The no-refresh syntax does not appear to be available in Extremeware.

show ports {mgmt | | vlan } info {detail}

You could try to disable clipaging which will end pausing at the end of the screen.

RE: what is the latest version IOS for Summit48si switches ?

Drew_C — Wed, 29 Jul 2015 23:19:00 GMT

The question about firmware has been answered in detail in this thread:
https://community.extremenetworks.com/extreme/topics/latest-firmware-for-summit-48si-15601