Old switches (B2, C2, C3 - Switch Management stop)

Andre_Brits_Kan — Tue, 25 Jul 2017 13:42:00 GMT

I understand these switches are out of warranty and EoL and EoS, but maybe someone can give us some guidance?

A client of ours has a couple of the B2, C2, C3 switches deployed on the management VLAN for the Cape Town Data Centre.

For some reason the switch stops responding on its management interface. No ping, snmp etc. to the Managment IP or from the Management IP to any other IP.

When one connects via console cable to the switch you are able to ping the configured management IP locally, but nothing else on the same subnet.

One is even able to configure a laptop for the same subnet and plug it into another port on the switch and ping other IPs which comes in via an uplink cable.

From the core switch if I do a show neighbor, I can see the problematic switch:

sw-ctdc-core1(su)->sh neighbors ge.8.6

TYPES: LL = LLDP Ct = CtronDp Ci = CiscoDp

Port Device ID Port ID Ty Network Address

--------------------------------------------------------------------------------

ge.8.6 00-1f-45-76-d5-68 ge.1.44 LL

ge.8.6 00-1f-45-76-d5-68 ge.1.44 Ct 172.25.250.185

ge.8.6 001f4576d568 ge.1.44 Ci 172.25.250.185

But from the problematic swich, I cannot see the core as a neighbor IP (although the correct port on the core is shown)

sw-ctdc-3rd-1(su)->show neighbors ge.1.44

Port Device ID Port ID Type Network Address

---------------------------------------------------------------------------------

ge.1.44 20:B3:99:55:9F:D9 ge.8.6 lldp

sw-ctdc-3rd-1(su)-

One can even see the mac addresses of devices via the uplink port from the problematic switch:

sw-ctdc-3rd-1(su)->show mac port ge.1.44

MAC Address FID Port Type

----------------- ---- ------------- --------

00-00-5E-00-01-FA 1250 ge.1.44 Learned

00-10-F3-39-A3-40 1250 ge.1.44 Learned

00-10-F3-3F-0A-DE 1250 ge.1.44 Learned

00-11-88-1C-56-75 1250 ge.1.44 Learned

00-11-88-1C-56-ED 1250 ge.1.44 Learned

00-11-88-2C-32-B1 1250 ge.1.44 Learned

00-11-88-39-CB-6C 1250 ge.1.44 Learned

00-11-88-A9-F7-F0 1250 ge.1.44 Learned

00-11-88-ED-D4-AC 1250 ge.1.44 Learned

00-11-88-F6-7B-18 1250 ge.1.44 Learned

20-B3-99-55-49-AE 1250 ge.1.44 Learned

20-B3-99-55-9C-97 1250 ge.1.44 Learned

20-B3-99-55-9F-D9 1250 ge.1.44 Learned

20-B3-99-56-A8-E5 1250 ge.1.44 Learned

78-AC-C0-F1-4A-8F 1250 ge.1.44 Learned

B4-B5-2F-A5-2E-46 1250 ge.1.44 Learned

B4-B5-2F-A5-32-1A 1250 ge.1.44 Learned

And from the core it does learn the MAC of the problematic switch:

sw-ctdc-core1(su-router)->show mac port-string ge.8.6

MAC Address FID Port Type Status

----------------- ---- ------------- ------- -------

20-B3-99-55-49-AE 0 ge.8.6 self

00-1F-45-76-D5-68 1250 ge.8.6 learned

Even the Router portion on the core does see the swtich (but cannot ping it) [Below is after I changed the local IP to 172.25.250.185

sw-ctdc-core1(su-router)->sh arp 172.25.250.185

LAGS: U = Unresolved S = Static

L = Local V = VRRP

* = Stale B = Best Guess Interface

H = Host Interest 2 = Secondary VLAN Entry

M = Main Router A = Proxy-All Entry

X = VxLan R = VxLan Remote

IP Address Hardware Address Flg Age Updated Interface Port

--------------- ----------------- --- ---------- ------- -------------- -------------

172.25.250.185 00-1f-45-76-d5-68 20m 20m vlan.0.1250 ge.8.6

--------------- ----------------- --- ---------- ------- -------------- -------------

ARP Entries Found: 1

sw-ctdc-core1(su-router)->

I tried the following:

Deleted the vlan (thus setting host vlan to 1) Deleted the IP address and put another one on in the same range Set the port between this switch and the core to 100Mbps Full Duplex without any auto-negotiation. Set the ports on this switch and on the core to the management VLAN untagged. Disabled spanning tree on these ports. Clear arp all

The switches are on the latest firmware available. 06.61.16.0002

The uptime is fairly recent as well: 66,8:18:55

Any comments would be appreciated.

topic Old switches (B2, C2, C3 - Switch Management stop) in End of Service Products

Old switches (B2, C2, C3 - Switch Management stop)