topic RE: Top task "tipFdbAgeT" is high on Summit-200 switch in End of Service Products

Top task "tipFdbAgeT" is high on Summit-200 switch

Joey1 — Thu, 25 Aug 2016 00:38:00 GMT

summit-200 switch has recently experienced a cpu spike causing latency through this switch. When running top I noticed the task "tipFdbAgeT" is running high which I haven't seen this task before.

could someone please explain what this task represents? I have tried searching online with no avail.

thanks,

Joey

RE: Top task "tipFdbAgeT" is high on Summit-200 switch

Henrique — Thu, 25 Aug 2016 01:01:00 GMT

Hi Joey,

I guess that this task is related to iparp table aging process.

I would try clearing the fdb and iparp table and check if the process utilization normalizes.

RE: Top task "tipFdbAgeT" is high on Summit-200 switch

Ijaz_Chughtai — Thu, 25 Aug 2016 01:03:00 GMT

Hi Joey,

The task "tipFdbAgeT' refers to IP FDB Aging Timer on Extremeware switches. You can clear the FDB table on Summit-200 to see if the CPU spike clears out which is probably due to software/hardware mismatch.

For these End of Life products, there are not many troubleshooting tools available. So if clearing table does not help, rebooting the switch will be next step which can re-initialize all the processes and might help.

Thanks,
Ijaz

RE: Top task "tipFdbAgeT" is high on Summit-200 switch

Joey1 — Thu, 25 Aug 2016 02:01:00 GMT

Thank you for the responses, after further troubleshooting it was a FDB issue where a directly connected device was upgraded which corrupted the IP FDB table.

RE: Top task "tipFdbAgeT" is high on Summit-200 switch

Ryan_Mathews — Thu, 25 Aug 2016 02:01:00 GMT

Glad you got it sorted Joey.

Thanks for joining the Hub!